sydney/cctl
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

CCPIL, a CC1110 hardware loader for Raspberry Pi - to solve the initial bootloader problem.

Browse Source
This commit is contained in:
Toby Jaffey committed 2012-08-07 21:13:15 +00:00
1 parent eb39b745cf
commit aee06d9e1e
10 files changed
+2260 -2
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

ccpil/bcm2835.h
+760
View File
@@ -0,0 +1,760 @@
// bcm2835.h
//
// C and C++ support for Broadcom BCM 2835 as used in Raspberry Pi
// http://elinux.org/RPi_Low-level_peripherals
// http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
//
// Author: Mike McCauley (mikem@open.com.au)
// Copyright (C) 2011 Mike McCauley
// $Id: bcm2835.h,v 1.4 2012/07/16 23:57:59 mikem Exp mikem $
//
/// \mainpage C library for Broadcom BCM 2835 as used in Raspberry Pi
///
/// This is a C library for Raspberry Pi (RPi). It provides access to
/// GPIO and other IO functions on the Broadcom BCM 2835 chip,
/// allowing access to the GPIO pins on the
/// 26 pin IDE plug on the RPi board so you can control and interface with various external devices.
///
/// It provides functions for reading digital inputs and setting digital outputs.
/// Pin event detection is supported by polling (interrupts not supported).
///
/// It is C++ compatible, and installs as a header file and non-shared library on
/// any Linux-based distro (but clearly is no use except on Raspberry Pi or another board with
/// BCM 2835).
///
/// The latest version of this documentation can be downloaded from
/// http://www.open.com.au/mikem/bcm2835
///
/// The version of the package that this documentation refers to can be downloaded
/// from http://www.open.com.au/mikem/bcm2835/bcm2835-1.6.tar.gz
/// You can find the latest version at http://www.open.com.au/mikem/bcm2835
///
/// Several example programs are provided.
///
/// Based on data in http://elinux.org/RPi_Low-level_peripherals and
/// http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
///
/// You can also find online help and discussion at http://groups.google.com/group/bcm2835
/// Please use that group for all questions and discussions on this topic.
/// Do not contact the author directly, unless it is to discuss commercial licensing.
///
/// Tested on debian6-19-04-2012, 2012-07-15-wheezy-raspbian and Occidentalisv01
/// CAUTION: it has been observed that when detect enables such as bcm2835_gpio_len()
/// are used and the pin is pulled LOW
/// it can cause temporary hangs on 2012-07-15-wheezy-raspbian and Occidentalisv01.
/// Reason for this is not yet determined, but suspect that an interrupt handler is
/// hitting a hard loop on those OSs.
/// If you must use bcm2835_gpio_len() and friends, make sure you disable the pins with
/// bcm2835_gpio_cler_len() and friends after use.
///
/// \par Installation
///
/// This library consists of a single non-shared library and header file, which will be
/// installed in the usual places by make install
///
/// tar zxvf bcm2835-1.0.tar.gz
/// cd bcm2835-1.0
/// ./configure
/// make
/// # as root:
/// make check
/// make install
///
/// \par Physical Addresses
///
/// The functions bcm2845_peri_read(), bcm2845_peri_write() and bcm2845_peri_set_bits()
/// are low level peripheral register access functions. They are designed to use
/// physical addresses as described in section 1.2.3 ARM physical addresses
/// of the BCM2835 ARM Peripherals manual.
/// Physical addresses range from 0x20000000 to 0x20FFFFFF for peripherals. The bus
/// addresses for peripherals are set up to map onto the peripheral bus address range starting at
/// 0x7E000000. Thus a peripheral advertised in the manual at bus address 0x7Ennnnnn is available at
/// physical address 0x20nnnnnn.
///
/// \par Pin Numbering
///
/// The GPIO pin numbering as used by RPi is different to and inconsistent with the underlying
/// BCM 2835 chip pin numbering. http://elinux.org/RPi_BCM2835_GPIOs
///
/// RPi has a 26 pin IDE header that provides access to some of the GPIO pins on the BCM 2835,
/// as well as power and ground pins. Not all GPIO pins on the BCM 2835 are available on the
/// IDE header.
///
/// The functions in this librray are disgned to be passed the BCM 2835 GPIO pin number and _not_
/// the RPi pin number. There are symbolic definitions for each of the available pins
/// that you should use for convenience. See \ref RPiGPIOPin.
///
/// \par SPI Pins
///
/// The bcm2835_spi_* functions allow you to control the BCM 2835 SPI0 interface,
/// allowing you to send and received data by SPI (Serial Peripheral Interface).
/// For more information about SPI, see http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus
///
/// When bcm2835_spi_begin() is called it changes the bahaviour of the SPI interface pins from their
/// default GPIO behaviour in order to support SPI. While SPI is in use, you will not be able
/// to control the state of the SPI pins through the usual bcm2835_spi_gpio_write(). When bcm2835_spi_end() is called, the SPI pins will all revert to inputs, and can then be configured and controled with the
/// usual bcm2835_gpio_* calls
///
/// The Raspberry Pi GPIO pins used for SPI are:
///
/// - P1-19 (MOSI)
/// - P1-21 (MISO)
/// - P1-23 (CLK)
/// - P1-24 (CE0)
/// - P1-26 (CE1)
///
/// \par Open Source Licensing GPL V2
///
/// This is the appropriate option if you want to share the source code of your
/// application with everyone you distribute it to, and you also want to give them
/// the right to share who uses it. If you wish to use this software under Open
/// Source Licensing, you must contribute all your source code to the open source
/// community in accordance with the GPL Version 2 when your application is
/// distributed. See http://www.gnu.org/copyleft/gpl.html and COPYING
///
/// \par Acknowledgements
///
/// Some of this code has been inspired by Dom and Gert.
///
/// \par Revision History
///
/// \version 1.0 Initial release
/// \version 1.1 Minor bug fixes
/// \version 1.2 Added support for SPI
/// \version 1.3 Added bcm2835_spi_transfern()
/// \version 1.4 Fixed a problem that prevented SPI CE1 being used. Reported by David Robinson.
/// \version 1.5 Added bcm2835_close() to deinit the library. Suggested by César Ortiz
/// \version 1.6 Document testing on 2012-07-15-wheezy-raspbian and Occidentalisv01
/// Functions bcm2835_gpio_ren(), bcm2835_gpio_fen(), bcm2835_gpio_hen()
/// bcm2835_gpio_len(), bcm2835_gpio_aren() and bcm2835_gpio_afen() now
/// changes only the pin specified. Other pins that were already previoulsy
/// enabled stay enabled.
/// Added bcm2835_gpio_clr_ren(), bcm2835_gpio_clr_fen(), bcm2835_gpio_clr_hen()
/// bcm2835_gpio_clr_len(), bcm2835_gpio_clr_aren(), bcm2835_gpio_clr_afen()
/// to clear the enable for individual pins, suggested by Andreas Sundstrom.
///
/// \author Mike McCauley (mikem@open.com.au)
// Defines for BCM2835
#ifndef BCM2835_H
#define BCM2835_H
#include <stdint.h>
/// \defgroup constants Constants for passing to and from library functions
/// The values here are designed to be passed to various functions in the bcm2835 library.
/// @{
/// This means pin HIGH, true, 3.3volts on a pin.
#define HIGH 0x1
/// This means pin LOW, false, 0volts on a pin.
#define LOW 0x0
// Physical addresses for various peripheral regiser sets
/// Base Physical Address of the BCM 2835 peripheral registers
#define BCM2835_PERI_BASE 0x20000000
/// Base Physical Address of the Pads registers
#define BCM2835_GPIO_PADS (BCM2835_PERI_BASE + 0x100000)
/// Base Physical Address of the Clock/timer registers
#define BCM2835_CLOCK_BASE (BCM2835_PERI_BASE + 0x101000)
/// Base Physical Address of the GPIO registers
#define BCM2835_GPIO_BASE (BCM2835_PERI_BASE + 0x200000)
/// Base Physical Address of the SPI0 registers
#define BCM2835_SPI0_BASE (BCM2835_PERI_BASE + 0x204000)
/// Base Physical Address of the PWM registers
#define BCM2835_GPIO_PWM (BCM2835_PERI_BASE + 0x20C000)
/// Size of memory page on RPi
#define BCM2835_PAGE_SIZE (4*1024)
/// Size of memory block on RPi
#define BCM2835_BLOCK_SIZE (4*1024)
// Defines for GPIO
// The BCM2835 has 54 GPIO pins.
// BCM2835 data sheet, Page 90 onwards.
/// GPIO register offsets from BCM2835_GPIO_BASE. Offsets into the GPIO Peripheral block in bytes per 6.1 Register View
#define BCM2835_GPFSEL0 0x0000 ///< GPIO Function Select 0
#define BCM2835_GPFSEL1 0x0004 ///< GPIO Function Select 1
#define BCM2835_GPFSEL2 0x0008 ///< GPIO Function Select 2
#define BCM2835_GPFSEL3 0x000c ///< GPIO Function Select 3
#define BCM2835_GPFSEL4 0x0010 ///< GPIO Function Select 4
#define BCM2835_GPFSEL5 0x0014 ///< GPIO Function Select 5
#define BCM2835_GPSET0 0x001c ///< GPIO Pin Output Set 0
#define BCM2835_GPSET1 0x0020 ///< GPIO Pin Output Set 1
#define BCM2835_GPCLR0 0x0028 ///< GPIO Pin Output Clear 0
#define BCM2835_GPCLR1 0x002c ///< GPIO Pin Output Clear 1
#define BCM2835_GPLEV0 0x0034 ///< GPIO Pin Level 0
#define BCM2835_GPLEV1 0x0038 ///< GPIO Pin Level 1
#define BCM2835_GPEDS0 0x0040 ///< GPIO Pin Event Detect Status 0
#define BCM2835_GPEDS1 0x0044 ///< GPIO Pin Event Detect Status 1
#define BCM2835_GPREN0 0x004c ///< GPIO Pin Rising Edge Detect Enable 0
#define BCM2835_GPREN1 0x0050 ///< GPIO Pin Rising Edge Detect Enable 1
#define BCM2835_GPFEN0 0x0048 ///< GPIO Pin Falling Edge Detect Enable 0
#define BCM2835_GPFEN1 0x005c ///< GPIO Pin Falling Edge Detect Enable 1
#define BCM2835_GPHEN0 0x0064 ///< GPIO Pin High Detect Enable 0
#define BCM2835_GPHEN1 0x0068 ///< GPIO Pin High Detect Enable 1
#define BCM2835_GPLEN0 0x0070 ///< GPIO Pin Low Detect Enable 0
#define BCM2835_GPLEN1 0x0074 ///< GPIO Pin Low Detect Enable 1
#define BCM2835_GPAREN0 0x007c ///< GPIO Pin Async. Rising Edge Detect 0
#define BCM2835_GPAREN1 0x0080 ///< GPIO Pin Async. Rising Edge Detect 1
#define BCM2835_GPAFEN0 0x0088 ///< GPIO Pin Async. Falling Edge Detect 0
#define BCM2835_GPAFEN1 0x008c ///< GPIO Pin Async. Falling Edge Detect 1
#define BCM2835_GPPUD 0x0094 ///< GPIO Pin Pull-up/down Enable
#define BCM2835_GPPUDCLK0 0x0098 ///< GPIO Pin Pull-up/down Enable Clock 0
#define BCM2835_GPPUDCLK1 0x009c ///< GPIO Pin Pull-up/down Enable Clock 1
/// \brief bcm2835PortFunction
/// Port function select modes for bcm2845_gpio_fsel()
typedef enum
{
BCM2835_GPIO_FSEL_INPT = 0b000, ///< Input
BCM2835_GPIO_FSEL_OUTP = 0b001, ///< Output
BCM2835_GPIO_FSEL_ALT0 = 0b100, ///< Alternate function 0
BCM2835_GPIO_FSEL_ALT1 = 0b101, ///< Alternate function 1
BCM2835_GPIO_FSEL_ALT2 = 0b110, ///< Alternate function 2
BCM2835_GPIO_FSEL_ALT3 = 0b111, ///< Alternate function 3
BCM2835_GPIO_FSEL_ALT4 = 0b011, ///< Alternate function 4
BCM2835_GPIO_FSEL_ALT5 = 0b010, ///< Alternate function 5
BCM2835_GPIO_FSEL_MASK = 0b111 ///< Function select bits mask
} bcm2835FunctionSelect;
/// \brief bcm2835PUDControl
/// Pullup/Pulldown defines for bcm2845_gpio_pud()
typedef enum
{
BCM2835_GPIO_PUD_OFF = 0b00, ///< Off – disable pull-up/down
BCM2835_GPIO_PUD_DOWN = 0b01, ///< Enable Pull Down control
BCM2835_GPIO_PUD_UP = 0b10 ///< Enable Pull Up control
} bcm2835PUDControl;
/// Pad control register offsets from BCM2835_GPIO_PADS
#define BCM2835_PADS_GPIO_0_27 0x002c ///< Pad control register for pads 0 to 27
#define BCM2835_PADS_GPIO_28_45 0x0030 ///< Pad control register for pads 28 to 45
#define BCM2835_PADS_GPIO_46_53 0x0034 ///< Pad control register for pads 46 to 53
/// Pad Control masks
#define BCM2835_PAD_SLEW_RATE_UNLIMITED 0x10 ///< Slew rate unlimited
#define BCM2835_PAD_HYSTERESIS_ENABLED 0x04 ///< Hysteresis enabled
#define BCM2835_PAD_DRIVE_2mA 0x00 ///< 2mA drive current
#define BCM2835_PAD_DRIVE_4mA 0x01 ///< 4mA drive current
#define BCM2835_PAD_DRIVE_6mA 0x02 ///< 6mA drive current
#define BCM2835_PAD_DRIVE_8mA 0x03 ///< 8mA drive current
#define BCM2835_PAD_DRIVE_10mA 0x04 ///< 10mA drive current
#define BCM2835_PAD_DRIVE_12mA 0x05 ///< 12mA drive current
#define BCM2835_PAD_DRIVE_14mA 0x06 ///< 14mA drive current
#define BCM2835_PAD_DRIVE_16mA 0x07 ///< 16mA drive current
/// \brief bcm2835PadGroup
/// Pad group specification for bcm2845_gpio_pad()
typedef enum
{
BCM2835_PAD_GROUP_GPIO_0_27 = 0, ///< Pad group for GPIO pads 0 to 27
BCM2835_PAD_GROUP_GPIO_28_45 = 1, ///< Pad group for GPIO pads 28 to 45
BCM2835_PAD_GROUP_GPIO_46_53 = 2 ///< Pad group for GPIO pads 46 to 53
} bcm2835PadGroup;
/// \brief RPiGPIOPin
/// Here we define Raspberry Pin GPIO pins on P1 in terms of the underlying BCM GPIO pin numbers.
/// These can be passed as a pin number to any function requiring a pin.
/// Not all pins on the RPi 26 bin IDE plug are connected to GPIO pins
/// and some can adopt an alternate function.
/// At bootup, pins 8 and 10 are set to UART0_TXD, UART0_RXD (ie the alt0 function) respectively
/// When SPI0 is in use (ie after bcm2835_spi_begin()), pins 19, 21, 23, 24, 26 are dedicated to SPI
/// and cant be controlled independently
typedef enum
{
RPI_GPIO_P1_03 = 0, ///< Pin P1-03
RPI_GPIO_P1_05 = 1, ///< Pin P1-05
RPI_GPIO_P1_07 = 4, ///< Pin P1-07
RPI_GPIO_P1_08 = 14, ///< Pin P1-08, defaults to alt function 0 UART0_TXD
RPI_GPIO_P1_10 = 15, ///< Pin P1-10, defaults to alt function 0 UART0_RXD
RPI_GPIO_P1_11 = 17, ///< Pin P1-11
RPI_GPIO_P1_12 = 18, ///< Pin P1-12
RPI_GPIO_P1_13 = 21, ///< Pin P1-13
RPI_GPIO_P1_15 = 22, ///< Pin P1-15
RPI_GPIO_P1_16 = 23, ///< Pin P1-16
RPI_GPIO_P1_18 = 24, ///< Pin P1-18
RPI_GPIO_P1_19 = 10, ///< Pin P1-19, MOSI when SPI0 in use
RPI_GPIO_P1_21 = 9, ///< Pin P1-21, MISO when SPI0 in use
RPI_GPIO_P1_22 = 25, ///< Pin P1-22
RPI_GPIO_P1_23 = 11, ///< Pin P1-23, CLK when SPI0 in use
RPI_GPIO_P1_24 = 8, ///< Pin P1-24, CE0 when SPI0 in use
RPI_GPIO_P1_26 = 7 ///< Pin P1-26, CE1 when SPI0 in use
} RPiGPIOPin;
/// Defines for SPI
/// GPIO register offsets from BCM2835_SPI0_BASE.
/// Offsets into the SPI Peripheral block in bytes per 10.5 SPI Register Map
#define BCM2835_SPI0_CS 0x0000 ///< SPI Master Control and Status
#define BCM2835_SPI0_FIFO 0x0004 ///< SPI Master TX and RX FIFOs
#define BCM2835_SPI0_CLK 0x0008 ///< SPI Master Clock Divider
#define BCM2835_SPI0_DLEN 0x000c ///< SPI Master Data Length
#define BCM2835_SPI0_LTOH 0x0010 ///< SPI LOSSI mode TOH
#define BCM2835_SPI0_DC 0x0014 ///< SPI DMA DREQ Controls
// Register masks for SPI0_CS
#define BCM2835_SPI0_CS_LEN_LONG 0x02000000 ///< Enable Long data word in Lossi mode if DMA_LEN is set
#define BCM2835_SPI0_CS_DMA_LEN 0x01000000 ///< Enable DMA mode in Lossi mode
#define BCM2835_SPI0_CS_CSPOL2 0x00800000 ///< Chip Select 2 Polarity
#define BCM2835_SPI0_CS_CSPOL1 0x00400000 ///< Chip Select 1 Polarity
#define BCM2835_SPI0_CS_CSPOL0 0x00200000 ///< Chip Select 0 Polarity
#define BCM2835_SPI0_CS_RXF 0x00100000 ///< RXF - RX FIFO Full
#define BCM2835_SPI0_CS_RXR 0x00080000 ///< RXR RX FIFO needs Reading ( full)
#define BCM2835_SPI0_CS_TXD 0x00040000 ///< TXD TX FIFO can accept Data
#define BCM2835_SPI0_CS_RXD 0x00020000 ///< RXD RX FIFO contains Data
#define BCM2835_SPI0_CS_DONE 0x00010000 ///< Done transfer Done
#define BCM2835_SPI0_CS_TE_EN 0x00008000 ///< Unused
#define BCM2835_SPI0_CS_LMONO 0x00004000 ///< Unused
#define BCM2835_SPI0_CS_LEN 0x00002000 ///< LEN LoSSI enable
#define BCM2835_SPI0_CS_REN 0x00001000 ///< REN Read Enable
#define BCM2835_SPI0_CS_ADCS 0x00000800 ///< ADCS Automatically Deassert Chip Select
#define BCM2835_SPI0_CS_INTR 0x00000400 ///< INTR Interrupt on RXR
#define BCM2835_SPI0_CS_INTD 0x00000200 ///< INTD Interrupt on Done
#define BCM2835_SPI0_CS_DMAEN 0x00000100 ///< DMAEN DMA Enable
#define BCM2835_SPI0_CS_TA 0x00000080 ///< Transfer Active
#define BCM2835_SPI0_CS_CSPOL 0x00000040 ///< Chip Select Polarity
#define BCM2835_SPI0_CS_CLEAR 0x00000030 ///< Clear FIFO Clear RX and TX
#define BCM2835_SPI0_CS_CLEAR_RX 0x00000020 ///< Clear FIFO Clear RX
#define BCM2835_SPI0_CS_CLEAR_TX 0x00000010 ///< Clear FIFO Clear TX
#define BCM2835_SPI0_CS_CPOL 0x00000008 ///< Clock Polarity
#define BCM2835_SPI0_CS_CPHA 0x00000004 ///< Clock Phase
#define BCM2835_SPI0_CS_CS 0x00000003 ///< Chip Select
/// \brief bcm2835SPIBitOrder
/// Specifies the SPI data bit ordering
typedef enum
{
BCM2835_SPI_BIT_ORDER_LSBFIRST = 0, ///< LSB First
BCM2835_SPI_BIT_ORDER_MSBFIRST = 1 ///< MSB First
}bcm2835SPIBitOrder;
/// \brief bcm2835SPIMode
/// Specify the SPI data mode
typedef enum
{
BCM2835_SPI_MODE0 = 0, ///< CPOL = 0, CPHA = 0
BCM2835_SPI_MODE1 = 1, ///< CPOL = 0, CPHA = 1
BCM2835_SPI_MODE2 = 2, ///< CPOL = 1, CPHA = 0
BCM2835_SPI_MODE3 = 3, ///< CPOL = 1, CPHA = 1
}bcm2835SPIMode;
/// \brief bcm2835SPIChipSelect
/// Specify the SPI chip select pin(s)
typedef enum
{
BCM2835_SPI_CS0 = 0, ///< Chip Select 0
BCM2835_SPI_CS1 = 1, ///< Chip Select 1
BCM2835_SPI_CS2 = 2, ///< Chip Select 2 (ie pins CS1 and CS2 are asserted)
BCM2835_SPI_CS_NONE = 3, ///< No CS, control it yourself
} bcm2835SPIChipSelect;
/// \brief bcm2835SPIClockDivider
/// Specifies the divider used to generate the SPI clock from the system clock.
/// Figures below give the divider, clock period and clock frequency.
typedef enum
{
BCM2835_SPI_CLOCK_DIVIDER_65536 = 0, ///< 65536 = 256us = 4kHz
BCM2835_SPI_CLOCK_DIVIDER_32768 = 32768, ///< 32768 = 126us = 8kHz
BCM2835_SPI_CLOCK_DIVIDER_16384 = 16384, ///< 16384 = 64us = 15.625kHz
BCM2835_SPI_CLOCK_DIVIDER_8192 = 8192, ///< 8192 = 32us = 31.25kHz
BCM2835_SPI_CLOCK_DIVIDER_4096 = 4096, ///< 4096 = 16us = 62.5kHz
BCM2835_SPI_CLOCK_DIVIDER_2048 = 2048, ///< 2048 = 8us = 125kHz
BCM2835_SPI_CLOCK_DIVIDER_1024 = 1024, ///< 1024 = 4us = 250kHz
BCM2835_SPI_CLOCK_DIVIDER_512 = 512, ///< 512 = 2us = 500kHz
BCM2835_SPI_CLOCK_DIVIDER_256 = 256, ///< 256 = 1us = 1MHz
BCM2835_SPI_CLOCK_DIVIDER_128 = 128, ///< 128 = 500ns = = 2MHz
BCM2835_SPI_CLOCK_DIVIDER_64 = 64, ///< 64 = 250ns = 4MHz
BCM2835_SPI_CLOCK_DIVIDER_32 = 32, ///< 32 = 125ns = 8MHz
BCM2835_SPI_CLOCK_DIVIDER_16 = 16, ///< 16 = 50ns = 20MHz
BCM2835_SPI_CLOCK_DIVIDER_8 = 8, ///< 8 = 25ns = 40MHz
BCM2835_SPI_CLOCK_DIVIDER_4 = 4, ///< 4 = 12.5ns 80MHz
BCM2835_SPI_CLOCK_DIVIDER_2 = 2, ///< 2 = 6.25ns = 160MHz
BCM2835_SPI_CLOCK_DIVIDER_1 = 1, ///< 0 = 256us = 4kHz
} bcm2835SPIClockDivider;
/// @}
// Defines for PWM
#define BCM2835_PWM_CONTROL 0
#define BCM2835_PWM_STATUS 1
#define BCM2835_PWM0_RANGE 4
#define BCM2835_PWM0_DATA 5
#define BCM2835_PWM1_RANGE 8
#define BCM2835_PWM1_DATA 9
#define BCM2835_PWMCLK_CNTL 40
#define BCM2835_PWMCLK_DIV 41
#define BCM2835_PWM1_MS_MODE 0x8000 /// Run in MS mode
#define BCM2835_PWM1_USEFIFO 0x2000 /// Data from FIFO
#define BCM2835_PWM1_REVPOLAR 0x1000 /// Reverse polarity
#define BCM2835_PWM1_OFFSTATE 0x0800 /// Ouput Off state
#define BCM2835_PWM1_REPEATFF 0x0400 /// Repeat last value if FIFO empty
#define BCM2835_PWM1_SERIAL 0x0200 /// Run in serial mode
#define BCM2835_PWM1_ENABLE 0x0100 /// Channel Enable
#define BCM2835_PWM0_MS_MODE 0x0080 /// Run in MS mode
#define BCM2835_PWM0_USEFIFO 0x0020 /// Data from FIFO
#define BCM2835_PWM0_REVPOLAR 0x0010 /// Reverse polarity
#define BCM2835_PWM0_OFFSTATE 0x0008 /// Ouput Off state
#define BCM2835_PWM0_REPEATFF 0x0004 /// Repeat last value if FIFO empty
#define BCM2835_PWM0_SERIAL 0x0002 /// Run in serial mode
#define BCM2835_PWM0_ENABLE 0x0001 /// Channel Enable
#ifdef __cplusplus
extern "C" {
#endif
/// \defgroup init Library initialisation and management
/// These functions allow you to intialise and control the bcm2835 library
/// @{
/// Initialise the library by opening /dev/mem and getting pointers to the
/// internal memory for BCM 2835 device registers. You must call this (successfully)
/// before calling any other
/// functions in this library (except bcm2835_set_debug).
/// If bcm2835_init() fails by returning 0,
/// calling any other function may result in crashes or other failures.
/// Prints messages to stderr in case of errors.
/// \return 1 if successful else 0
extern int bcm2835_init();
/// Close the library, deallocating any allocaterd memory and closing /dev/mem
/// \return 1 if successful else 0
extern int bcm2835_close();
/// Sets the debug level of the library.
/// A value of 1 prevents mapping to /dev/mem, and makes the library print out
/// what it would do, rather than accessing the GPIO registers.
/// A value of 0, the default, causes normal operation.
/// Call this before calling bcm2835_init();
/// \param[in] debug The new debug level. 1 means debug
extern void bcm2835_set_debug(uint8_t debug);
/// @} // end of init
/// \defgroup lowlevel Low level register access
/// These functions provide low level register access, and should not generally
/// need to be used
///
/// @{
/// Reads 32 bit value from a peripheral address
/// The read is done twice, and is therefore always safe in terms of
/// manual section 1.3 Peripheral access precautions for correct memory ordering
/// \param[in] paddr Physical address to read from. See BCM2835_GPIO_BASE etc.
/// \return the value read from the 32 bit register
/// \sa Physical Addresses
extern uint32_t bcm2835_peri_read(volatile uint32_t* paddr);
/// Reads 32 bit value from a peripheral address without the read barrier
/// You should only use this when your code has previously called bcm2835_peri_read()
/// within the same peripheral, and no other peripheral access has occurred since.
/// \param[in] paddr Physical address to read from. See BCM2835_GPIO_BASE etc.
/// \return the value read from the 32 bit register
/// \sa Physical Addresses
extern uint32_t bcm2835_peri_read_nb(volatile uint32_t* paddr);
/// Writes 32 bit value from a peripheral address
/// The write is done twice, and is therefore always safe in terms of
/// manual section 1.3 Peripheral access precautions for correct memory ordering
/// \param[in] paddr Physical address to read from. See BCM2835_GPIO_BASE etc.
/// \param[in] value The 32 bit value to write
/// \sa Physical Addresses
extern void bcm2835_peri_write(volatile uint32_t* paddr, uint32_t value);
/// Writes 32 bit value from a peripheral address without the write barrier
/// You should only use this when your code has previously called bcm2835_peri_write()
/// within the same peripheral, and no other peripheral access has occurred since.
/// \param[in] paddr Physical address to read from. See BCM2835_GPIO_BASE etc.
/// \param[in] value The 32 bit value to write
/// \sa Physical Addresses
extern void bcm2835_peri_write_nb(volatile uint32_t* paddr, uint32_t value);
/// Alters a number of bits in a 32 peripheral regsiter.
/// It reads the current valu and then alters the bits deines as 1 in mask,
/// according to the bit value in value.
/// All other bits that are 0 in the mask are unaffected.
/// Use this to alter a subset of the bits in a register.
/// The write is done twice, and is therefore always safe in terms of
/// manual section 1.3 Peripheral access precautions for correct memory ordering
/// \param[in] paddr Physical address to read from. See BCM2835_GPIO_BASE etc.
/// \param[in] value The 32 bit value to write, masked in by mask.
/// \param[in] mask Bitmask that defines the bits that will be altered in the register.
/// \sa Physical Addresses
extern void bcm2835_peri_set_bits(volatile uint32_t* paddr, uint32_t value, uint32_t mask);
/// @} // end of lowlevel
/// \defgroup gpio GPIO register access
/// These functions allow you to control the GPIO interface. You can set the
/// function of each GPIO pin, read the input state and set the output state.
/// @{
/// Sets the Function Select register for the given pin, which configures
/// the pin as Input, Output or one of the 6 alternate functions.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from RPiGPIOPin.
/// \param[in] mode Mode to set the pin to, one of BCM2835_GPIO_FSEL_* from \ref bcm2835FunctionSelect
extern void bcm2835_gpio_fsel(uint8_t pin, uint8_t mode);
/// Sets the specified pin output to
/// HIGH.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
/// \sa bcm2835_gpio_write()
extern void bcm2835_gpio_set(uint8_t pin);
/// Sets the specified pin output to
/// LOW.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
/// \sa bcm2835_gpio_write()
extern void bcm2835_gpio_clr(uint8_t pin);
/// Reads the current level on the specified
/// pin and returns either HIGH or LOW. Works whether or not the pin
/// is an input or an output.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
/// \return the current level either HIGH or LOW
extern uint8_t bcm2835_gpio_lev(uint8_t pin);
/// Event Detect Status.
/// Tests whether the specified pin has detected a level or edge
/// as requested by bcm2835_gpio_ren(), bcm2835_gpio_fen(), bcm2835_gpio_hen(),
/// bcm2835_gpio_len(), bcm2835_gpio_aren(), bcm2835_gpio_afen().
/// Clear the flag for a given pin by calling bcm2835_gpio_set_eds(pin);
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
/// \return HIGH if the event detect status for th given pin is true.
extern uint8_t bcm2835_gpio_eds(uint8_t pin);
/// Sets the Event Detect Status register for a given pin to 1,
/// which has the effect of clearing the flag. Use this afer seeing
/// an Event Detect Status on the pin.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
extern void bcm2835_gpio_set_eds(uint8_t pin);
/// Enable Rising Edge Detect Enable for the specified pin.
/// When a rising edge is detected, sets the appropriate pin in Event Detect Status.
/// The GPRENn registers use
/// synchronous edge detection. This means the input signal is sampled using the
/// system clock and then it is looking for a “011” pattern on the sampled signal. This
/// has the effect of suppressing glitches.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
extern void bcm2835_gpio_ren(uint8_t pin);
/// Disable Rising Edge Detect Enable for the specified pin.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
extern void bcm2835_gpio_clr_ren(uint8_t pin);
/// Enable Falling Edge Detect Enable for the specified pin.
/// When a falling edge is detected, sets the appropriate pin in Event Detect Status.
/// The GPRENn registers use
/// synchronous edge detection. This means the input signal is sampled using the
/// system clock and then it is looking for a “100” pattern on the sampled signal. This
/// has the effect of suppressing glitches.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
extern void bcm2835_gpio_fen(uint8_t pin);
/// Disable Falling Edge Detect Enable for the specified pin.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
extern void bcm2835_gpio_clr_fen(uint8_t pin);
/// Enable High Detect Enable for the specified pin.
/// When a HIGH level is detected on the pin, sets the appropriate pin in Event Detect Status.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
extern void bcm2835_gpio_hen(uint8_t pin);
/// Disable High Detect Enable for the specified pin.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
extern void bcm2835_gpio_clr_hen(uint8_t pin);
/// Enable Low Detect Enable for the specified pin.
/// When a LOW level is detected on the pin, sets the appropriate pin in Event Detect Status.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
extern void bcm2835_gpio_len(uint8_t pin);
/// Disable Low Detect Enable for the specified pin.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
extern void bcm2835_gpio_clr_len(uint8_t pin);
/// Enable Asynchronous Rising Edge Detect Enable for the specified pin.
/// When a rising edge is detected, sets the appropriate pin in Event Detect Status.
/// Asynchronous means the incoming signal is not sampled by the system clock. As such
/// rising edges of very short duration can be detected.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
extern void bcm2835_gpio_aren(uint8_t pin);
/// Disable Asynchronous Rising Edge Detect Enable for the specified pin.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
extern void bcm2835_gpio_clr_aren(uint8_t pin);
/// Enable Asynchronous Falling Edge Detect Enable for the specified pin.
/// When a falling edge is detected, sets the appropriate pin in Event Detect Status.
/// Asynchronous means the incoming signal is not sampled by the system clock. As such
/// falling edges of very short duration can be detected.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
extern void bcm2835_gpio_afen(uint8_t pin);
/// Disable Asynchronous Falling Edge Detect Enable for the specified pin.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
extern void bcm2835_gpio_clr_afen(uint8_t pin);
/// Sets the Pull-up/down register for the given pin. This is
/// used with bcm2835_gpio_pudclk() to set the Pull-up/down resistor for the given pin.
/// However, it is usually more convenient to use bcm2835_gpio_set_pud().
/// \param[in] pud The desired Pull-up/down mode. One of BCM2835_GPIO_PUD_* from bcm2835PUDControl
/// \sa bcm2835_gpio_set_pud()
extern void bcm2835_gpio_pud(uint8_t pud);
/// Clocks the Pull-up/down value set earlier by bcm2835_gpio_pud() into the pin.
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
/// \param[in] on HIGH to clock the value from bcm2835_gpio_pud() into the pin.
/// LOW to remove the clock.
/// \sa bcm2835_gpio_set_pud()
extern void bcm2835_gpio_pudclk(uint8_t pin, uint8_t on);
/// Reads and returns the Pad Control for the given GPIO group.
/// \param[in] group The GPIO pad group number, one of BCM2835_PAD_GROUP_GPIO_*
/// \return Mask of bits from BCM2835_PAD_* from \ref bcm2835PadGroup
extern uint32_t bcm2835_gpio_pad(uint8_t group);
/// Sets the Pad Control for the given GPIO group.
/// \param[in] group The GPIO pad group number, one of BCM2835_PAD_GROUP_GPIO_*
/// \param[in] control Mask of bits from BCM2835_PAD_* from \ref bcm2835PadGroup
extern void bcm2835_gpio_set_pad(uint8_t group, uint32_t control);
/// Delays for the specified number of milliseconds.
/// Uses nanosleep(), and therefore does not use CPU until the time is up.
/// \param[in] millis Delay in milliseconds
extern void delay (unsigned int millis);
/// Delays for the specified number of microseconds.
/// Uses nanosleep(), and therefore does not use CPU until the time is up.
/// However, you are at the mercy of nanosleep(). From the manual for nanosleep:
/// If the interval specified in req is not an exact multiple of the granu-
/// larity underlying clock (see time(7)), then the interval will be
/// rounded up to the next multiple. Furthermore, after the sleep com-
/// pletes, there may still be a delay before the CPU becomes free to once
/// again execute the calling thread.
/// It is reported that a delay of 0 microseconds on RaspberryPi will in fact
/// result in a dleay of about 80 microseconds. Your mileage may vary.
/// \param[in] micros Delay in microseconds
extern void delayMicroseconds (unsigned int micros);
/// Sets the output state of the specified pin
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
/// \param[in] on HIGH sets the output to HIGH and LOW to LOW.
extern void bcm2835_gpio_write(uint8_t pin, uint8_t on);
/// Sets the Pull-up/down mode for the specified pin. This is more convenient than
/// clocking the mode in with bcm2835_gpio_pud() and bcm2835_gpio_pudclk().
/// \param[in] pin GPIO number, or one of RPI_GPIO_P1_* from \ref RPiGPIOPin.
/// \param[in] pud The desired Pull-up/down mode. One of BCM2835_GPIO_PUD_* from bcm2835PUDControl
extern void bcm2835_gpio_set_pud(uint8_t pin, uint8_t pud);
/// @}
/// \defgroup spi SPI access
/// These functions let you use SPI0 (Serial Peripheral Interface) to
/// interface with an external SPI device.
/// @{
/// Start SPI operations.
/// Forces RPi SPI0 pins P1-19 (MOSI), P1-21 (MISO), P1-23 (CLK), P1-24 (CE0) and P1-26 (CE1)
/// to alternate function ALT0, which enables those pins for SPI interface.
/// You should call bcm2835_spi_end() when all SPI funcitons are complete to return the pins to
/// their default functions
/// \sa bcm2835_spi_end()
extern void bcm2835_spi_begin();
/// End SPI operations.
/// SPI0 pins P1-19 (MOSI), P1-21 (MISO), P1-23 (CLK), P1-24 (CE0) and P1-26 (CE1)
/// are returned to their default INPUT behaviour.
extern void bcm2835_spi_end();
/// Sets the SPI bit order
/// NOTE: has no effect. Not supported by SPI0.
/// Defaults to
/// \param[in] order The desired bit order, one of BCM2835_SPI_BIT_ORDER_*,
/// see \ref bcm2835SPIBitOrder
extern void bcm2835_spi_setBitOrder(uint8_t order);
/// Sets the SPI clock divider and therefore the
/// SPI clock speed.
/// \param[in] divider The desired SPI clock divider, one of BCM2835_SPI_CLOCK_DIVIDER_*,
/// see \ref bcm2835SPIClockDivider
extern void bcm2835_spi_setClockDivider(uint16_t divider);
/// Sets the SPI data mode
/// Sets the clock polariy and phase
/// \param[in] mode The desired data mode, one of BCM2835_SPI_MODE*,
/// see \ref bcm2835SPIMode
extern void bcm2835_spi_setDataMode(uint8_t mode);
/// Sets the chip select pin(s)
/// When an bcm2835_spi_transfer() is made, the selected pin(s) will be asserted during the
/// transfer.
/// \param[in] cs Specifies the CS pins(s) that are used to activate the desired slave.
/// One of BCM2835_SPI_CS*, see \ref bcm2835SPIChipSelect
extern void bcm2835_spi_chipSelect(uint8_t cs);
/// Sets the chip select pin polarity for a given pin
/// When an bcm2835_spi_transfer() occurs, the currently selected chip select pin(s)
/// will be asserted to the
/// value given by active. When transfers are not happening, the chip select pin(s)
/// return to the complement (inactive) value.
/// \param[in] cs The chip select pin to affect
/// \param[in] active Whether the chip select pin is to be active HIGH
extern void bcm2835_spi_setChipSelectPolarity(uint8_t cs, uint8_t active);
/// Transfers one byte to and from the currently selected SPI slave.
/// Asserts the currently selected CS pins (as previously set by bcm2835_spi_chipSelect)
/// during the transfer.
/// Clocks the 8 bit value out on MOSI, and simultaneously clocks in data from MISO.
/// Returns the read data byte from the slave.
/// Uses polled transfer as per section 10.6.1 of teh BCM 2835 ARM Peripherls manual
/// \param[in] value The 8 bit data byte to write to MOSI
/// \return The 8 bit byte simultaneously read from MISO
/// \sa bcm2835_spi_transfern()
extern uint8_t bcm2835_spi_transfer(uint8_t value);
/// Transfers any number of bytes to and from the currently selected SPI slave.
/// Asserts the currently selected CS pins (as previously set by bcm2835_spi_chipSelect)
/// during the transfer.
/// Clocks the len 8 bit bytes out on MOSI, and simultaneously clocks in data from MISO.
/// The returned data from the slave replaces the transmitted data in the buffer.
/// Uses polled transfer as per section 10.6.1 of teh BCM 2835 ARM Peripherls manual
/// \param[in,out] buf Buffer of bytes to send. Received bytes will replace the contents
/// \param[in] len Number of bytes int eh buffer, and the number of bytes to send/received
/// \sa bcm2835_spi_transfer()
extern void bcm2835_spi_transfern(char* buf, uint32_t len);
/// @}
#ifdef __cplusplus
}
#endif
#endif // BCM2835_H
/// @example blink.c
/// Blinks RPi GPIO pin 11 on and off
/// @example input.c
/// Reads the state of an RPi input pin
/// @example event.c
/// Shows how to use event detection on an input pin
/// @example spi.c
/// Shows how to use SPI interface to transfer a byte to and from an SPI device
/// @example spin.c
/// Shows how to use SPI interface to transfer a number of bytes to and from an SPI device